Every guide, in one place
99 step-by-step guides covering 37 devices across 17 model families — every one checked against the manufacturer’s own documentation (here’s how). Search what your device is doing, or jump straight to your model.
Filter by model
Filter by type
Showing all 99 guides.
Litter-Robot 4
23 bulletins · TB-LR4-
Hardware Fix TB-LR4-001
Litter-Robot 4 Red Light: Every Red Code Explained + the Fix
Solid red, flashing red, red with yellow, red with blue: here is what each Litter-Robot 4 red light means, and the 15-minute sensor clean that clears most.
Read the guide → -
Hardware Fix TB-LR4-002
Litter-Robot 4 flashing blue with an empty drawer: DFI fix
Litter-Robot 4 flashing blue with an empty drawer? Clean the OmniSense laser sensors and run the forced DFI calibration with this expert guide.
Read the guide → -
Hardware Fix TB-LR4-003
Litter-Robot 4 Motor Fault: Fix It Before Replacing the Motor
Blue and white light bar, or 'Overloaded Globe' in the app? Most Litter-Robot 4 motor faults are litter packed in the globe track, not a dead motor. 25 min.
Read the guide → -
Wi-Fi Fix TB-LR4-004
Litter-Robot 4 Wi-Fi not connecting or offline: fix guide
Litter-Robot 4 won't connect to Wi-Fi or keeps going offline? Fix blinking yellow pairing faults, band steering, and mesh router stability issues.
Read the guide → -
App Fix TB-LR4-005
Litter-Robot 4 app sync and offline issues: fix guide
Litter-Robot 4 app showing wrong status, stuck offline, or not updating? Clear connection cache, perform battery-safe hard resets, and restore cloud sync.
Read the guide → -
Troubleshooting TB-LR4-006
Litter-Robot 4 faults and odors: the complete fix guide
Litter-Robot 4 malfunctioning, cycling stuck, or smelling despite regular cleaning? Clean the OmniSense sensors, zero the SmartScale, and fix odors for good.
Read the guide → -
Troubleshooting TB-LR4-007
Litter-Robot 4 globe liner sticking? Try this free fix first
Waste sticking to your Litter-Robot 4 globe liner after every cycle? Learn the free mechanical fix most owners miss, plus when you actually need a new liner.
Read the guide → -
Troubleshooting TB-LR4-008
Litter-Robot 4 LED too bright at night: the real fix
Litter-Robot 4 LED panel keeping you up at night? Learn how to turn off the Night Light, use Sleep Mode, and shield the status ring for good.
Read the guide → -
Troubleshooting TB-LR4-009
Litter-Robot 4 liners too expensive? Cheaper bags that fit
Official Litter-Robot 4 liners cost $12–$55 plus shipping. See the exact waste drawer size, which cheap Litter-Robot 4 bags fit, and how to cut refill costs.
Read the guide → -
Troubleshooting TB-LR4-010
Litter-Robot 4: only the Power button blinks blue?
Litter-Robot 4 showing only a blinking blue Power button after an outage? Learn what Backup Battery Mode means and how to install or check the battery.
Read the guide → -
Reliability Report TB-LR4-011
Litter-Robot 4 after 2 years: what owners really run into
A sourced reliability report on the Litter-Robot 4 beyond warranty — documented failure patterns, real causes, and out-of-pocket repair costs.
Read the guide → -
Troubleshooting TB-LR4-012
Litter-Robot 4: pinch detect & bonnet error fix
Litter-Robot 4 stuck on a yellow ping-pong light, green-and-white flash, or bonnet error? Follow Whisker's official steps to clear pinch and bonnet faults.
Read the guide → -
Troubleshooting TB-LR4-013
Litter-Robot phorid flies: how to get rid of them for good
Small flies around your Litter-Robot? Moist waste-drawer residue attracts phorid flies. Here's the cleaning and drying routine that stops them.
Read the guide → -
Troubleshooting TB-LR4-014
Litter-Robot 4 smells even after deep cleaning? Fix it
Litter-Robot 4 still smells within hours of a full teardown clean? Worn seal strips, not the plastic, are usually the cause — here's the real fix.
Read the guide → -
Troubleshooting TB-LR4-015
Litter-Robot 4 dumping clean litter into waste drawer: fix
Litter-Robot 4 dumping clean, unused litter into the waste drawer? Learn the three most common causes and the free fix for each, in under 10 minutes.
Read the guide → -
Troubleshooting TB-LR4-016
How to replace the Litter-Robot 4 carbon filter
Litter-Robot 4 carbon filter needs replacing? Here's exactly where it sits, how to swap it in minutes, and how often — straight from Whisker's manual.
Read the guide → -
Troubleshooting TB-LR4-017
Litter-Robot 4 LitterHopper: setup & blue/purple fix
Litter-Robot 4 panel flashing blue and purple, or just unboxed the LitterHopper? Here's how the auto-refill accessory works, setup steps, and the detection fix.
Read the guide → -
Maintenance Guide TB-LR4-018
How to clean your Litter-Robot 4: the complete guide
The complete Litter-Robot 4 maintenance guide: daily cleaning routine, odor fixes, hardware faults, and every troubleshooting bulletin in one place.
Read the guide → -
Troubleshooting TB-LR4-019
Litter-Robot 4 troubleshooting: find your issue fast
Litter-Robot 4 acting up? Match your exact light, connectivity, or odor issue to the right fix guide — sensors, Wi-Fi, cleaning, and accessories.
Read the guide → -
Troubleshooting TB-LR4-020
Litter-Robot 4 motor or cat sensor? Which part, what it costs
Cleaning and resetting didn't clear the fault? Compare the Litter-Robot 4 motor assembly ($55) and the cat presence sensor ($15), and pick the right part.
Read the guide → -
Troubleshooting TB-LR4-021
Litter-Robot 4 laser board: which SKU fits, and what it costs
Three Litter-Robot 4 laser boards sell for $50 under different SKUs. Which one matches your serial number, and how to confirm you actually need it.
Read the guide → -
Troubleshooting TB-LR4-022
Litter-Robot 4 motor fault back after a new motor? What to check
A new Litter-Robot 4 motor that faults again within days points somewhere else. What the recurrence interval tells you, and what to check before paying twice.
Read the guide → -
Troubleshooting TB-LR4-023
Air purifier for a Litter-Robot 4: sizing, placement, real cost
A carbon filter only treats the air that passes through it. How to size and place a purifier around a Litter-Robot 4, and what it actually costs per year.
Read the guide →
Litter-Robot 5
13 bulletins · TB-LR5-
Troubleshooting TB-LR5-001
Litter-Robot 5 Waste Bin Percentage Inaccurate: Fix It
Litter-Robot 5 showing the wrong waste drawer percentage or a false Drawer Full alert? Here's the real fix — sensor cleaning, liner swap, and calibration.
Read the guide → -
Troubleshooting TB-LR5-002
Litter-Robot 5 WasteID Inaccurate? Here's the Real Fix
Litter-Robot 5 WasteID mixing up urine and feces, cycling too fast, or confusing which cat visited? Here's the real cause and the fix that works.
Read the guide → -
Troubleshooting TB-LR5-003
Litter-Robot 5 Pro Firmware Update Stuck: Wait or Unplug?
Whisker says a Litter-Robot 5 Pro firmware update can take 30 minutes and look frozen. When to wait, when one 60-second unplug helps, and when it will not.
Read the guide → -
Troubleshooting TB-LR5-004
Litter-Robot 5 Not Cycling: The Complete Fix Guide
Litter-Robot 5 won't cycle automatically? Here's every real cause — full drawer, sleep mode, dirty sensors, overload — and the exact fix for each one.
Read the guide → -
Troubleshooting TB-LR5-005
Litter-Robot 5 Obstruction Detected: How to Fix It
Litter-Robot 5 stuck on Obstruction Detected? Clear the dual pinch bars, fix a puffy liner, and reseat the carbon filter cover with this step-by-step guide.
Read the guide → -
Troubleshooting TB-LR5-006
Litter-Robot 5 Overloaded Globe: Blinking Red Fix
Litter-Robot 5 globe stuck with a blinking red light? Fix the Overloaded Globe error — clear excess litter, check the motor, and reset the SmartScale.
Read the guide → -
Troubleshooting TB-LR5-007
Litter-Robot 5 Globe Position Fault: The Full Fix
Litter-Robot 5 stuck on Globe Position Fault? Here's every documented cause — overfilled globe, loose magnets, worn seal strips — and the step-by-step fix.
Read the guide → -
Troubleshooting TB-LR5-008
Litter-Robot 5 Safety Bar Disconnect: How to Fix It
Litter-Robot 5 or Pro flashing red with Safety Bar Disconnect? Clear the pinch bars, reseat the filter cover, and fix seal strips with this step-by-step guide.
Read the guide → -
Troubleshooting TB-LR5-009
Litter-Robot 5 Bonnet Removed Error: The Real Fix
Litter-Robot 5 stuck on Bonnet Removed even though it's on? Reinstall the bonnet correctly, check the sensor contacts, and clear the error in under 10 minutes.
Read the guide → -
Wi-Fi Fix TB-LR5-010
Litter-Robot 5 & Pro Won't Connect: The Full Fix
Litter-Robot 5 or Pro stuck during WiFi setup? Fix credential errors, Bluetooth pairing, and the 2.4GHz-only band limit with this step-by-step onboarding guide.
Read the guide → -
Troubleshooting TB-LR5-011
Litter-Robot 5 Motion in Drawer: How to Clear It
Litter-Robot 5 stuck on Motion in Drawer and won't cycle? Clear the notification, check the cat presence sensor bars, and fix it with this step-by-step guide.
Read the guide → -
Troubleshooting TB-LR5-012
Litter-Robot 5 Extended Scale Activity: The Fix
Litter-Robot 5 stuck on Extended Scale Activity for 30+ minutes? Check placement, zero the SmartScale, and clear the notification with this step-by-step guide.
Read the guide → -
Wi-Fi Fix TB-LR5-013
Litter-Robot 5 & Pro Offline: How to Reconnect
Litter-Robot 5 or Pro suddenly offline after working fine? Reconnect automatically, update your network, or factory reset with this step-by-step guide.
Read the guide →
Litter-Robot 3
16 bulletins · TB-LR3-
Troubleshooting TB-LR3-001
How to Fix Litter-Robot 3 Red Flashing Light (Cat Sensor Fault)
Litter-Robot 3 stuck with a red flashing light? It means the Cat Sensor has been tripped for 30+ minutes. Here's how to clear excess weight and reset it fast.
Read the guide → -
Troubleshooting TB-LR3-002
How to Fix Litter-Robot 3 Motor Jam & Obstruction Errors
Litter-Robot 3 flashing yellow-red or blue-red? That's a motor jam or overload. Here's how to clear the obstruction and get the Globe cycling again.
Read the guide → -
Troubleshooting TB-LR3-003
How to Fix Litter-Robot 3 All Lights Flashing (Position Fault)
Litter-Robot 3 stuck with all three lights flashing? It can't find Home or Dump position. Here's how to check the globe magnets and fix it yourself.
Read the guide → -
Troubleshooting TB-LR3-004
How to Fix Litter-Robot 3 Drawer Full Light That Won't Clear
Litter-Robot 3 blue light flashing even with an empty waste drawer? The DFI sensor is likely dirty or misreading. Here's the fix, step by step.
Read the guide → -
Troubleshooting TB-LR3-005
How to Fix Litter-Robot 3 Yellow Flashing (Cycle Interrupted)
Litter-Robot 3 yellow light flashing mid-cycle? A slow flash means the cycle was interrupted; a fast flash means the Anti-Pinch feature tripped. Here's the fix.
Read the guide → -
Troubleshooting TB-LR3-006
Litter-Robot 3 Solid Yellow Light, Globe Won't Move? Fix It
Litter-Robot 3 stuck on a solid yellow light with the globe not turning? It's usually a paused cycle or a loose gear. Here's how to check and fix both.
Read the guide → -
Troubleshooting TB-LR3-007
How to Fix Litter-Robot 3 No Power / Won't Turn On
Litter-Robot 3 completely dead, no lights at all? Before assuming the base is fried, check these five things — most no-power cases are the cord or outlet.
Read the guide → -
Troubleshooting TB-LR3-008
Litter-Robot 3 Globe Liner Sticking? Try This Fix First
Litter-Robot 3 waste sticking to the globe liner or the unit getting stuck mid-cycle? Here's the free mechanical fix before you order a replacement liner.
Read the guide → -
Wi-Fi Fix TB-LR3-009
Litter-Robot 3 Connect Won't Connect to Wi-Fi or the App
Litter-Robot 3 Connect stuck offline or failing app setup? Here's how the Wi-Fi upgrade pairs, and the fixes for onboarding failures and dropped connections.
Read the guide → -
Troubleshooting TB-LR3-010
Litter-Robot 3 troubleshooting: find your issue fast
Litter-Robot 3 acting up? Match your exact light color or pattern to the right fix — motor jams, position faults, DFI, Wi-Fi issues, and more.
Read the guide → -
Troubleshooting TB-LR3-011
Litter-Robot 3 parts prices: when a repair stops being worth it
Every Litter-Robot 3 replacement part, from the $5 pinch contact to the $349 base, and the point where fixing an old unit stops making financial sense.
Read the guide → -
Troubleshooting TB-LR3-012
Litter-Robot 3 DFI kit at $30: what's in it, and do you need it
The Litter-Robot 3 Pinch Contact and DFI Kit is $30 and holds four parts. What's inside, how long it really takes, and when the $5 part is enough instead.
Read the guide → -
Troubleshooting TB-LR3-013
Litter-Robot 3 pinch contact: a $5 part with five names
Pinch contact, anti-pinch pins, LR3PINCH, LR34009 — one $5 part under five names, and one listing sells it used for $55. How to buy the right one.
Read the guide → -
Troubleshooting TB-LR3-014
Litter-Robot 3 motor replacement: $48, tools and time needed
Litter-Robot 3 globe not moving at all? The motor assembly is $48 and takes about 25 minutes with basic tools. Here's the test to run before you buy.
Read the guide → -
Troubleshooting TB-LR3-015
Litter-Robot 3 globe liner: reseat it or replace it for $60
Litter still sticking to the Litter-Robot 3 globe liner? Four causes, how to tell them apart, and when the $60 liner kit is the real answer instead.
Read the guide → -
Wi-Fi Fix TB-LR3-016
Litter-Robot 3 Connect won't pair? Your serial number decides
A Litter-Robot 3 Connect that won't finish onboarding is either settings or hardware. Your serial number says whether it's the $84.99 board or the $100 kit.
Read the guide →
Litter-Robot EVO
3 bulletins · TB-EVO-
Hardware Fix TB-EVO-001
Litter-Robot EVO Red Light: What It Means & How to Fix It
Litter-Robot EVO blinking red? It covers 13 different faults — drawer full, drawer removed, jams, and more. Here's how to read each one and clear it fast.
Read the guide → -
Hardware Fix TB-EVO-002
Litter-Robot EVO Drawer Full Alert Won't Clear? Real Fix
Litter-Robot EVO stuck on Drawer Full even right after emptying it? A puffy liner or dusty sensor is the usual cause — here's the exact fix, step by step.
Read the guide → -
Hardware Fix TB-EVO-003
Litter-Robot EVO Overloaded Globe Error: How to Fix It
Litter-Robot EVO globe stopping, retracting, and flashing red? That's the Overloaded Globe fault — here's Whisker's full teardown checklist to clear it.
Read the guide →
PETKIT Pura Max
9 bulletins · TB-PPM-
Hardware Fix TB-PPM-001
PETKIT Pura Max Screen Not Working: Fix Blank OLED Display
PETKIT Pura Max screen not working — blank, black, or unresponsive OLED display? Start with a 60-second power cycle, then dry the bezel safely, without heat.
Read the guide → -
Hardware Fix TB-PPM-004
How to Fix a PETKIT Pura Max Waste Bin Alignment Gap
PETKIT Pura Max leaking odor from a gap between the waste drawer lid and the bin rim? Realign the bin and recalibrate the motorized hatch to reseal it.
Read the guide → -
Troubleshooting TB-PPM-005
PETKIT Pura Max still smells? Urine in the base
PETKIT Pura Max or Pura Max 2 still smelling after a full clean? Urine pooling under the cylinder is the usual cause. Here's the free fix, then the deep clean.
Read the guide → -
Hardware Fix TB-PPM-006
How to Fix PETKIT Pura Max 2 Safety Lockouts & Weight Sensor Errors
PETKIT Pura Max 2 stuck on a safety pause or showing inaccurate weights? Learn to clean proximity sensors, clear the base, and recalibrate weight sensors.
Read the guide → -
Troubleshooting TB-PPM-007
PETKIT Pura Max 2 wasting litter? Wrong sifter
PETKIT Pura Max 2 dumping clean litter in the bin or leaving crumbs in the middle? Both come from the sifter. Here's how to match it to your litter.
Read the guide → -
Troubleshooting TB-PPM-008
PETKIT Pura Max 2 Air Purifier Batteries Dying in a Week?
PETKIT Pura Max 2 air purifier batteries dying within a week? It's not the battery brand. The Smart Spray fires after every cleaning cycle. Here's the fix.
Read the guide → -
Troubleshooting TB-PPM-009
PETKIT Purobot Max Pro Litter Sticking to Mat? Real Fix
PETKIT Purobot Max Pro litter sticking to the mat after every deep clean? Learn why scrubbing damages the coating, and the fix that actually works.
Read the guide → -
Troubleshooting TB-PPM-010
PETKIT Pura Max 2: Upper Cover Not Closed? Real Fix
PETKIT Pura Max 2 stuck on Upper cover not closed even though it looks shut? It's almost always a reassembly order issue — here's the exact fix.
Read the guide → -
Troubleshooting TB-PPM-011
PETKIT Pura Max troubleshooting: find your issue fast
PETKIT Pura Max or Pura Max 2 acting up? Match your exact symptom — screen, smell, litter waste, or cover errors — to the right fix guide for your model.
Read the guide →
PETKIT Eversweet
7 bulletins · TB-EVM-
Hardware Fix TB-EVM-001
PETKIT Eversweet 3 Pro & Eversweet Max: Fix Lack of Water Error
PETKIT Eversweet 3 Pro or Eversweet Max stuck on Lack of Water? Fix the shared wireless pump — trapped air or limescale — in about 10 minutes.
Read the guide → -
Troubleshooting TB-EVM-002
PETKIT Eversweet Max 2 stuck on Bluetooth? Fix remote access
PETKIT Eversweet Max 2 stuck on Bluetooth with no remote control? The fountain has no Wi-Fi radio. Here is how to set up the relay so that it holds.
Read the guide → -
Troubleshooting TB-EVM-003
PETKIT Eversweet Ultra: How to Clean the Motor & Impeller
App won't show you how to clean the PETKIT Eversweet Ultra impeller? Learn the full teardown, the right tools, and how to clean the motor without leaks.
Read the guide → -
Troubleshooting TB-EVM-004
PETKIT Eversweet Max Cordless: Filter Light Won't Turn Off
PETKIT Eversweet Max Cordless filter light still red after installing a fresh cartridge? You're missing the in-app reset step — here's the exact fix.
Read the guide → -
Troubleshooting TB-EVM-005
PETKIT Eversweet Max Cordless: Blinking Blue and Green Fix
PETKIT Eversweet Max Cordless blinking blue and green together? That's the manual's own Main Unit Failure code — here's what to check before contacting support.
Read the guide → -
Troubleshooting TB-EVM-006
PETKIT Eversweet troubleshooting: find your issue fast
PETKIT Eversweet fountain acting up? Match your exact model — 3 Pro, Max, Max 2, Ultra, or Max Cordless — and symptom to the right fix guide.
Read the guide → -
Troubleshooting TB-EVM-007
PETKIT Eversweet pump won't run? Reset it before you replace it
PETKIT's own forum says the pump won't start until you reset the fountain after a filter change. Check that and the 5V supply before buying a new pump.
Read the guide →
PETKIT Purobot
2 bulletins · TB-PBU-
Hardware Fix TB-PBU-001
PETKIT Purobot Ultra 'Camera Missing': Clean the Pogo Pins
Purobot Ultra AI camera offline or showing 'Camera missing' with a black feed? Usually dust on the pogo pin contacts, not a dead camera. 10-minute fix.
Read the guide → -
Troubleshooting TB-PBU-002
PETKIT Purobot Ultra: Trash Bag Not Refilled? Real Fix
PETKIT Purobot Ultra won't auto-refill after a new recharge ring? It needs a manual double-press confirmation — here's the exact step owners miss.
Read the guide →
Sure Petcare
10 bulletins · TB-SPC-
Hardware Fix TB-SPC-001
How to Fix SureFlap Microchip Pet Door Battery Drain & Reading Issues
SureFlap Microchip Pet Door Connect not reading chips or eating batteries? Clean the optical sensors, isolate it from metal, and fix Hub dropouts.
Read the guide → -
Hardware Fix TB-SPC-002
How to Fix a Sure Petcare Hub Flashing Red Loop
Sure Petcare Connect Hub stuck flashing red and won't connect? Learn to perform a battery-safe 10-second factory reset and restore Ethernet cloud connection.
Read the guide → -
Hardware Fix TB-SPC-003
How to Fix Sure Petcare Hub Clashing and Radio Interference
Are your Sure Petcare hubs clashing? Learn to eliminate RF channel interference, optimize hub locations, and resolve slow or offline flap connection issues.
Read the guide → -
Troubleshooting TB-SPC-004
Sure Petcare Pet Door Clicking Noise? The Fix
SureFlap Microchip Pet Door Connect making a repeated clicking noise? It's almost always the batteries or their contacts — here's the 5-minute fix.
Read the guide → -
Troubleshooting TB-SPC-005
Sure Petcare Pet Door Won't Read the Chip? Check This First
SureFlap Microchip Pet Door Connect not reading your pet's chip? Rule out metal door interference and RF noise before assuming a hardware fault.
Read the guide → -
Troubleshooting TB-SPC-006
SureFlap battery life too short? Clean these 3 spots first
SureFlap Microchip Pet Door batteries dying fast? Dirty sensors, draught excluders, or tunnel floor are the top causes — here's the 10-minute fix.
Read the guide → -
Troubleshooting TB-SPC-007
Sure Petcare Hub Slow Notifications? Here's the Fix
Sure Petcare app notifications showing up minutes late? It's not the same as a hub going offline — here's the fix for a struggling connection.
Read the guide → -
Troubleshooting TB-SPC-008
Sure Petcare troubleshooting: find your issue fast
SureFlap pet door or Sure Petcare Hub acting up? Match your exact symptom — battery, reading, clicking, or connectivity — to the right fix guide.
Read the guide → -
Troubleshooting TB-SPC-009
SureFlap batteries draining fast? Alkaline C cells only
Sure Petcare specifies alkaline C cells for its Connect range, and rechargeables break the battery gauge. Here's what actually drains a SureFlap fast.
Read the guide → -
Troubleshooting TB-SPC-010
Sure Petcare Hub notifications slow? Find the failing link
Slow Sure Petcare alerts come from one of three links: flap to Hub, Hub to router, or Sure Petcare's cloud. How to test each one before buying anything.
Read the guide →
CATLINK
1 bulletin · TB-CTLCatit
2 bulletins · TB-CPF-
Hardware Fix TB-CPF-001
How to Fix Catit Pixi Smart Fountain Pump & Red Warning Light
Is your Catit Pixi Smart Fountain humming or showing a false red warning light? Follow our expert guide to descale the pump and clean the sensor contacts.
Read the guide → -
Troubleshooting TB-CPF-002
Catit Pixi replacement pump: which one fits your fountain
The Catit Pixi and Pixi Smart use different pumps, and the wrong one won't fit. How to tell which you own, what it costs, and when to replace it.
Read the guide →
Homerunpet
1 bulletin · TB-HRPNeakasa
1 bulletin · TB-NEAPetcube
1 bulletin · TB-PCBPlexiDor
1 bulletin · TB-PLXPower Pet
2 bulletins · TB-PWP-
Hardware Fix TB-PWP-001
How to Fix Power Pet Automatic Door Panel Stalls & Sensor Range Issues
Power Pet door stalling mid-travel or missing the collar? Clean the tracks, replace the brush seals, inspect the spool loop, and recalibrate the range.
Read the guide → -
Troubleshooting TB-PWP-002
Power Pet door not detecting the collar: battery, range or MS-5
Power Pet door still ignoring the collar after a fresh cell? Check the range knob and the B-3V1A battery before paying $59.99 for a new MS-5 collar.
Read the guide →
PETLIBRO Luma Smart Litter Box
4 bulletins · TB-PLL-
Hardware Fix TB-PLL-001
PETLIBRO Luma weight sensor error: how to fix it
PETLIBRO Luma weight sensor error? The fix is almost always placement: a soft floor, tight clearance, or something touching the base. Steps in order below.
Read the guide → -
Hardware Fix TB-PLL-002
PETLIBRO Luma placement error: how to fix it
PETLIBRO Luma placement error alert? Check the floor, clearance, and base first, then two causes the weight sensor guide doesn't cover. Steps below.
Read the guide → -
Troubleshooting TB-PLL-003
PETLIBRO Luma false waste bin full alert: how to fix it
PETLIBRO Luma waste bin full alert but the drawer isn't actually full? Check the firmware, the bag, and the door sensor before assuming it's broken.
Read the guide → -
Hardware Fix TB-PLL-004
PETLIBRO Luma steady red light: won't clean, how to fix
PETLIBRO Luma stuck on a steady red light and won't clean? Check for a jam first, then use the right reset — not the same one as other Luma alerts.
Read the guide →
Whisker Feeder-Robot
3 bulletins · TB-WFR-
Hardware Fix TB-WFR-001
How to Fix Whisker Feeder-Robot Hopper Jam & Red Blinking Light
Whisker Feeder-Robot showing a red blinking light or a stuck hopper? Clear the auger jam, clean the Food Chute sensors, and fix solid purple lights.
Read the guide → -
Hardware Fix TB-WFR-002
How to Replace a Whisker Feeder-Robot Backup Battery
Is your Whisker Feeder-Robot cutting out during power cuts or restarting mid-dispense? Follow our step-by-step guide to replace the UB1213k backup battery.
Read the guide → -
App Fix TB-WFR-003
How to Fix Whisker Feeder-Robot Sync & Meal Schedule Issues
Feeder-Robot skipping scheduled meals or ignoring app schedule changes? Follow our step-by-step guide to restore stable Wi-Fi and sync schedules.
Read the guide →
Nothing matches those filters yet. Try a shorter search, or answer the three questions instead.